Oral-B Pro Battery Toothbrush, 2 Batteries Included (packaging may vary)

Product Information

With our Vitality and PRO toothbrushes, it can sometimes be difficult to know when they’re correctly switched off. If they’re on the charger while switched on, they won’t charge correctly. The best thing to do is to put it on the charger for 30 minutes or so, and then try to switch it on. If it switches on, that’s great, and it was correctly switched off while charging. However, if doesn’t switch on, that might mean that it wasn’t switched off during charging.

The PRO 3, on top of the Daily clean and Sensitive modes, comes with a specialized whitening clean mode. All system components (e.g., toothbrush handle, charger, power cord, SmartGuide). You do not need to include accessories like the brush heads or refill stand. Remove the handle from the charger and the base of the handle should come off. The spring might fall out so don’t lose it! Unclip the carrier for the pressure warning light wires and gently remove the carrier from the top shaft (arrowed below) then put it to one side.Be sure you’re charging for the full time noted in the manual. For iO series as of 7 it takes 3 hours. For iO 6, Genius and Smart range and Pro 3 it takes 12 hours. For our Vitality toothbrushes, that’s 16 hours. For the other brushes, they should be charged for up to 24 hours. Compatible with a variety of Oral-B refill heads for every dental need. Brush heads should be replaced every 3 months.

To avoid brush head breakage which may generate a small part choking hazard or damage teeth: Prior to each use, ensure the brush head fits well. Discontinue use of the toothbrush if brush head no longer fits properly. Never use without a brush head. If the product is dropped, the brush head should be replaced before the next use even if no damage is visible. Original size 42mm by 14mm 1.2V NiMH with tags (Support us by buying from ToothbrushBattery.com here)The Oral-B Pro 1000 rechargeable toothbrush provides a clinically proven superior clean vs. a regular manual toothbrush. The professionally inspired design of the CrossAction brush head surrounds each tooth with bristles angled at 16 degrees, and 3D cleaning action oscillates, rotates, and pulsates to break up and remove up to 300% more plaque along the gumline than a regular manual toothbrush. The pressure sensor stops pulsations if you brush too hard to prevent harmful over-brushing and there are 3 modes, plus an in-handle timer to help you brush for a dentist-recommended 2 minutes. If it hasn’t already fallen out remove the spring from inside the coil in base of the handle and put it somewhere safe. You now have the option to either replace the old battery with one of the same physical dimensions or modify the plastic housing to accept a longer, higher capacity 49mm battery. Please support us with writing these repair guides by buying your replacement battery through the links to our secure online shop shown. The original-sized 42mm x 14mm batteries are 1200mAh capacity and the longer 49mm x 14mm batteries are 2200mAh, over 80% higher capacity! Higher capacity means your toothbrush will run for longer before it needs recharging. See the picture below for (left to right) replacement 42mm battery, original 42mm battery and replacement 49mm battery. minute coaching timer. ProCore constant power delivers optimal performance every time. 2 AA batteries included. If fitted, locate the solder point for the pressure warning switch (arrowed below) and desolder it. Then unclip the switch and put it to one side.

This guide is for educational purposes only and is offered without guarantee or liability. For professional use only. Any act carried out by yourself is entirely at your own risk. Any damage to yourself, your toothbrush or anything else is entirely your responsibility. Tools / Parts / Equipment Product contains batteries and/or recyclable electric waste. For environment protection do not dispose in household waste, but for recycling take to electric waste collection points provided in your country. At the end of the instructions you could add info on whether it is possible to test the toothbrush without fully assembling it first. That would save a lot of aggravation because the disassembly is so iffy.The tip above about where to press the handle to get the base off was a great one and should be in the instructions. Additional heating did not hurt and nothing broke. Power up to a better clean with the Oral-B Pro-Health Precision Clean battery-powered toothbrush. Your teeth and gums will feel pampered because you're removing more plaque than a regular manual toothbrush each time you brush. All our toothbrushes apart from the Vitality and PRO 500 have a charging light. It should blink green during charging. Note that this can take up to 15 minutes to start happening if the toothbrush was entirely drained of battery during brushing. When charging is complete, the blinking should stop.

For hygienic reasons, use individual brush handles and brush heads for each family member. For cleaning, switch off the handle and remove the brush head. Rinse both parts separately with water and wipe them dry before reassembling.Or upgrade to 49mm by 14mm 1.2V NiMH by modifying your brush as shown. (Support us by buying from ToothbrushBattery.com here)