LIGHTAILING Light Set For (Ghostbusters Ecto-1) Building Blocks Model - Led Light kit Compatible With Lego 21108(NOT Included The Model)

Product Information

Remove the following pieces from the 2×6 plate and then connect one of the provided grey 1×2 Lego plates on each side as per below. PLEASE NOTE: THIS SET IS A LED LIGHTING KIT ONLY. LEGO® SETS ARE NOT INCLUDED. STANDARD RC + SOUND VS STANDARD REMOTE VS STANDARD

Take 1 flashing Bit light and place it on top of the grey stud closest to the outside of the plate ensuring the LED component part is facing the correct way up. Secure this in place by connecting one of the provided transparent blue 1×2 plates over the top. Repeat this for the light on the other side ensuring the LED is installed to the stud closest to the outside and the LED component is facing the correct way up. When installing Bit Lights under LEGO® pieces, ensure they are placed the correct way up (Yellow LED component exposed). You can either place them directly on top of LEGO® studs or in between. Take the white 4×4 plate with pieces attached and disassemble the pieces as we will be replacing the 2 grey pieces. Take another standard Bit Light (non flashing) and install it with the LED component part facing down (as it wont connect with it facing up). Secure this into place by connecting another transparent blue plate (which we have provided) over the top. Ensure the LED component part is facing down or inward

LEGO® Ideas

We will be installing lights to the headlights first. To do this, remove the following pieces from the front of the car. Continue to remove the following pieces which make up the windscreen, side windows, and grey triangular tiles from the sides of the car. Take the front section of the roof and remove the white roof plate from underneath, then remove the transparent blue triangular pieces, followed by the grey pole with attached light pieces. Take another flashing Bit light and install it to this section ensuring that the LED is laid over the white stud and secured down by reconnecting the red piece over the top.

Take the 2 provided Lego 1×6 white pieces and connect them underneath the roof securing the front and middle roof sections together. KIT itself : really nice KIT. You just simply can not compare to "without light" KIT. That is an another level.The Modular Building series is a dream come true for adult fans of LEGO®. With ultra-detailed buildings, ranging from a Town Hall (10224) to a Detective's Office (10246), there is enough variety in sets to create your own large scale LEGO® town. And now with our easy to install light kits, you can create your very own realistic and fully functioning town. LEGO® Technic Take one of the provided grey Lego pieces with clip and place 1 standard Bit Light (non flashing) on top of the stud. Secure the LED in place by connecting the transparent red round piece over the top ensuring that the LED component part is facing the correct way up. Ensure the cable from the LED is facing the same way the clip underneath is facing